Working Nikon SF-200 SF-200(S) 35mm Bulk Slide Feeder for Nikon Scanner

Description

You are bidding on a working Nikon SF-200(S) bulk slide feeder.
If you have more than a few 35mm slides to scan a bulk slide feeder makes it a lot easier and faster.  Nikon's SF-200(S) is compatible with Nikon LS-2000, 4000, and 5000 Coolscan scanners.  Load the front tray with slides and start scanning.  The SF-200(S) ejects the slide that has just been scanned and then loads the next slide in the magazine.
I used this slide feeder successfully to scan hundreds of slides with both an LS-2000 and a CoolScan 5000 ED.  The only difference between the SF-200(S) and Nikon's later SF-210 is that the SF-200(S) doesn’t have an adjustment for the thickness of the slide mount.  This can lead to jams with some types of slide mounts and bent slides can sometimes get caught or stuck.  There are many solutions to this difficulty, most involving taping a credit card to the wall separating the input and output magazines.  By positioning the card to form an opening about 1.5 slide thicknesses most jams can be prevented,  There are many tutorials on how to do this -- just use the Google.  I found that even with the possibility of an occasional jam using the SF-200(S) was a lot easier and faster than hand loading individual slides into Nikon's single slide holder.  I also had a lot fewer problems with dust when using the feeder -- I could clean and load a stack of slides at once instead of blowing off each individual slide before manually loading it.
Please see my other listings for a compatible Nikon LS-2000 slide scanner.
TERMS & CONDITIONS
I don't have a lot of silly rules for buyers: Pay for your item and I'll send it you. I've been a buyer and a seller on eBay for more than 20 years and have a near perfect feedback record. I'll trust you and you can trust me to do right.
FREE USA SHIPPING!
Elsewhere please use the eBay shipping calculator to calculate your shipping cost
.